Tattoo coloring skills
1. Block processing
When doing the whole lip coloring, the upper and lower lip surfaces are divided into four areas, and each area can be divided into 2-3 blocks according to the number of eyebrow tattooing needles. After the block pattern is good, go to the next block after the pattern is completed. Note: Before making the next block, the liquid in the needle cap must be sucked out, and the coloring material should be re-stained to ensure the coloring effect.
When making lip lines, segmental treatment should be adopted, that is, the lip lines should be divided into several sections, and the needles should be moved section by section. When making lip lines, the coloring material should also be applied frequently to ensure smooth flow of color. In case of bleeding or color If the material is piled up, avoid this place and make up the needle when you do the next coloring.
Second, the layer-by-layer color method
When operating the lip surface, use the retractable needle cap to adjust the length of the needle. The length of the needle is exposed by 1mm when the coloring is done all the time, the length of the needle is exposed by 1.5mm when the coloring is performed for the second time, and the length of the needle is exposed by 2mm when the coloring is performed for the third time. When the needle is turned on, the needle must be lowered, and the needle cap is attached to the skin when running the needle to ensure that all the required needle length penetrates the skin, and the needle insertion angle is 90 degrees.
3. Wipe less and penetrate more
When operating the lip coloring, do not wipe while wiping. After each coloring, let the coloring material remain on the lips for 2-3 minutes, and then gently wipe it. After the entire lip is finished, apply the coloring material. it's wrong.
Four and five words
Light: The operator's movements should be light, the left hand should not pull the skin vigorously, and the needle should not be too heavy with the right hand.
Soft: The needle movement is gentle, follow the trend, the strength is consistent, and the needle is inserted at a vertical angle.
Fast: The needle movement should be fast and stable, not fast or slow.
Posting: The needle cap is attached to the skin, allowing the exposed needle length to penetrate the skin to ensure even coloring.
Dense: The needle movement route should be dense, and the coloring effect must be uniform no matter what needle movement method is used.
Guangzhou Qinmei Cosmetics Co., Ltd. 's products, whether interim or permanent, comply fully with all appropriate producing regulations.
Guangzhou Qinmei Cosmetics Co., Ltd. serves a wide variety of professional markets and industries across the globe. Contact us at Qinmei PMU Products to find the you have always dreamt of.
NEWS can be applied in different ways as best microblading products.
Latest technology and manufacturing equipment has improved the quality of NEWS.